Mad Heaters Tempest 2 Slim Titanium
Mad Heaters Tempest 2 Slim Titanium – View 2
Mad Heaters Tempest 2 Slim Titanium – View 3

Mad Heaters

Tempest 2 Slim Titanium

SKU: 8514
Smono Jungle

Retailer access

To see prices, please log in or register your account.

Suitable only for herbs

SKU: 8514
Description

The Tempest 2 Slim from Mad Heaters is a herb vaporizer with no battery and no electronics: the ball head is heated with a torch lighter or an induction heater and releases the stored heat to the material as you draw. It takes over the cap and heating principle of the Tempest 2, but sits on a slim grade 5 titanium body with a diameter of 14.5 mm and a weight of 42 g. The cap is also made of titanium.

Features

  • Ball head with about 40 zirconia balls (3 mm), predominantly convective heating
  • Heating with a torch lighter or induction, approved by the manufacturer for the iSpire Wand and YLL 3.0
  • Pointer display and click signal show when the cap is hot enough
  • Four fill levels: approx. 0.05 g, 0.1 g, 0.15 g or 0.2 g
  • Airflow adjustable at the cap and at the body
  • Replaceable cooling unit, the medium length is included
  • Fits straight into a 10 mm water pipe adapter
  • Grade 5 titanium, heat shield made of PPS plastic, 122 × 14.5 mm
  • Spare screens, spare O-rings and tool included

Who is the Tempest 2 Slim for?

For customers who want a device without a battery and are happy to work with a flame or an induction heater. Anyone who already knows a pen-style vaporizer such as a DynaVap will find their feet quickly. The ball head is designed to vaporize a load completely with a single heat-up. There is no degree readout; you read the temperature from the pointer and the click. Anyone vaporizing for the first time and expecting numbers on a display is better served by an electric device.

Ball head as a heat store

The cap holds about 40 zirconia balls with a diameter of 3 mm. They absorb the heat and release it to the air flowing through, so the material is heated predominantly by convection. The balls can be swapped: the manufacturer lists ruby, quartz glass, silicon carbide and stainless steel as well as a two-piece heating core as alternatives. Heavier fills store the heat for longer and heat up more steadily, lighter ones react faster. We stock the Mad Heaters ruby balls as an accessory.

Torch or induction

With the torch lighter, the cap is heated from a distance of about 1 cm while turning it slowly; the manufacturer recommends a double or triple flame or a medium single flame. The first click usually comes at the lower end of the suitable temperature range. An induction heater is more reproducible: on the YLL 3.0 at 80 W, the titanium cap with zirconia balls needs about 35–40 seconds, and a cap that is still warm needs 8–12 seconds less. With the iSpire Wand, the opening must be at least 14.0 mm wide. If the customer does not have a heat source yet, it belongs in the same order.

Fill level, airflow and cooling

With the tube supplied, the chamber screen is set to one of four levels: approx. 0.05 g, 0.1 g, 0.15 g or 0.2 g. The smallest level is new on the Slim. The air can be regulated in two places: at the cap via the induction sleeve and at the body via a small ring under the heat shield. The cooling unit in the body is replaceable; the medium length is supplied, and the manufacturer offers a shorter and a longer one separately.

Titanium, stainless steel and Tempest 2

Cap and heating system are the same on both models; the manufacturer's spare cap and spare chamber fit both. The Slim has a narrower body with a heat shield made of PPS plastic instead of aluminium or titanium, and an additional fill level of 0.05 g. The mouthpiece, heat shield and wooden sleeve of the Tempest 2, however, do not fit the Slim. With us, the Tempest 2 Slim replaces the discontinued Tempest 2. Compared with the Tempest 2 Slim Stainless Steel, body and cap are made of titanium, the device is lighter at 42 g and comes with zirconia instead of quartz balls; heating principle and handling are the same.

Cleaning and care

Before first use, all parts are cleaned thoroughly. For the basic clean, the manufacturer says to place the device in isopropyl alcohol, then rinse it with warm water and dry it completely. In between, it is enough to clean the cooling coil and body with isopropyl alcohol and cotton swabs. After every wet clean, heat the cap once while empty so that the residual moisture evaporates. O-rings and screens are wear parts and belong in your range as resupply.

How you use the device

  1. Before first use, clean all parts, then loosen the screw on the cap once and carefully tighten it again.
  2. Unscrew the cap, fill the chamber with ground material, press it down only lightly and gently screw the cap back on.
  3. Heat the cap with the torch lighter, turning it, or in the induction heater, watching the pointer and the click.
  4. Draw long and slowly, covering most of the air inlet on the body while you do.
  5. Hold the hot cap with a magnet or case, unscrew it and empty the material; the cap stays hot for several minutes.