Fenix Mini Plus Wood Finish
Fenix Mini Plus Wood Finish – View 2
Fenix Mini Plus Wood Finish – View 3
Fenix

Mini Plus Wood Finish

SKU: 8088
Smono Jungle

Retailer access

To see prices, please log in or register your account.

Suitable only for herbs

SKU: 8088
Description

The FENiX Mini Plus is the most compact vaporizer in the range: 80 × 50 × 25 mm small, 136 g light and fitted with a hybrid heater that works mainly by hot air. A device for discreet use on the go.

Features

  • Hybrid heating of convection and conduction, convection-led
  • Degree-precise temperature control from 120 °C to 221 °C
  • Heat-up time around 25 seconds
  • OLED display with target and actual temperature plus battery level
  • Glass mouthpiece with coloured readiness indicator
  • Two-button operation
  • Automatic shut-off after four minutes without use
  • USB-C charging in around 85 minutes
  • Only 136 g at 80 × 50 × 25 mm

Hybrid heating with a convection focus

The Mini Plus combines hot air and contact heat, with convection taking the lead. That yields soft, pleasantly tempered vapour that stays surprisingly generous even at low settings – remarkable for the size. The chamber reaches operating temperature in about 25 seconds.

Glass mouthpiece with status indicator

The mouthpiece is made outside from a plastic that does not heat up; inside sits backlit glass. During heat-up it glows red, when ready it turns green – so you can read the status without looking at the display. The glass itself adds no flavour of its own.

Controls and safety

Two buttons cover the whole operation: switch on, change temperature, go. After four minutes without use the device switches itself off – handy when you put it aside and forget it. The OLED shows target and actual temperature plus battery level.

Format and battery

At 80 × 50 × 25 mm and 136 g the Mini Plus is among the smallest in its class and disappears into a trouser pocket. Charging runs via USB-C in about 85 minutes.

How to use it

  1. Take off the mouthpiece and loosely fill the chamber with finely ground material.
  2. Switch the device on with the main button and select the temperature.
  3. Wait until the indicator in the mouthpiece turns from red to green (around 25 seconds).
  4. Draw slowly and evenly.
  5. After the session let it cool, empty the chamber and clean the mouthpiece.