Ghost 2

The Dr. Dabber Ghost 2 is a pocket device for concentrates with a fully ceramic vapour path: neither plastic nor silicone touches the vapour. Three heating modes change how the temperature runs across the session.

Features

• eChamber with titanium dual coil and 360° ceramic heating
• Five temperature settings from about 216 °C to 282 °C
• Three dynamic modes: ascending, steady, descending
• Airpath and mouthpiece entirely of ceramic
• 1000 mAh battery for around 20 heating cycles
• Pocket format of about 89 × 51 × 25 mm
• USB-C port
• For waxes and concentrates

Three heating modes instead of one temperature

The Ghost 2 does not just hold one temperature but can change it across the session. In ascending mode it starts cool and gets warmer – a soft entry with full aroma and the yield at the end. Steady mode holds the value as usual. Descending mode starts hot and cools down, like a quartz banger after heating; that is the run many know from classic dabbing.

Ceramic throughout the vapour path

From oven to mouthpiece the path is made of ceramic – no plastic, no silicone. The vapour therefore takes on no flavour of its own. The eChamber itself works with a titanium dual coil and ceramic heating that acts all around rather than only at the base.

Five settings for everyday use

The five presets cover the usual range for concentrates: aroma-focused at the bottom, built for dense vapour at the top. Combined with the three modes that yields fifteen combinations – enough to find your own routine.

Format and battery

At around 89 × 51 × 25 mm the Ghost 2 is a true pocket device. The 1000 mAh battery carries through about 20 heating cycles depending on temperature and charges via USB-C.

How to use it

1. Take off the mouthpiece and place a small amount of concentrate in the eChamber.
2. Put the mouthpiece back on and switch the device on.
3. Select the temperature setting and heating mode.
4. Let it heat and draw slowly.
5. Wipe out the chamber with a cotton swab once cool.