FX Mini Wood Finish
Suitable only for herbs
The WOLKENKRAFT FX MINI is a compact convection vaporizer with a titanium chamber. It is the entry point into the range for anyone who wants degree-precise temperature control without carrying a large device.
Features
- Convection heating with a titanium chamber
- Temperature from 160 °C to 221 °C, adjustable by the degree
- Up to temperature in around 25 seconds
- 1600 mAh battery for six to eight sessions
- OLED display showing temperature and battery level
- Four-minute session
- Glass mouthpiece, aluminium housing
- Dimensions 76 × 51 × 25 mm, 135 g
Titanium chamber for around 0.2 g
The chamber is made of titanium and holds around 0.2 g. It should be filled loosely – if the material is pressed down, the hot air cannot find a way through and the draw becomes hard. Titanium is flavour-neutral and wipes out easily with the included brush.
Convection instead of contact heat
The FX MINI heats by hot air flowing through, not by a hot chamber wall. Nothing combusts, the vapour stays aromatic, and the load is used more evenly than with pure conduction heating.
Operation and display
The temperature range runs from 160 °C to 221 °C and is set in one-degree steps. The OLED shows temperature and battery level. A session runs for four minutes, after which the FX MINI switches off – that saves the battery and stops the chamber heating on unnecessarily.
Format and battery
At 76 × 51 × 25 mm and 135 g the FX MINI fits in a trouser pocket. The 1600 mAh battery is good for six to eight sessions.
How to use it
- Remove the glass mouthpiece and fill the titanium chamber loosely with ground herbs.
- Switch the device on and select the temperature on the display.
- Let it heat up for around 25 seconds.
- Draw slowly and evenly.
- After the session empty the chamber and clean it with the brush.
