New Peak Canyon
Suitable only for wax
The Puffco New Peak is an electric dab rig with a 3D ceramic chamber and a water-filtered glass top. The chamber heats not only from the bottom but through the side walls as well – the concentrate vaporizes evenly instead of scorching at the base.
Features
- 3D ceramic chamber with bottom and side heating
- Four temperature settings from about 254 °C to 310 °C
- Heat-up time around 25 seconds
- Real-time temperature control during the draw
- Battery for about 30 sessions per charge
- USB-C, fully charged in around 2 hours
- Detachable glass top with water filtration
- Operated by a single button
The 3D chamber: heating from all sides
Classic chambers heat only the base – the concentrate on top stays cold while the bottom scorches. The Peak's 3D ceramic chamber places heating zones in the side walls too. The material therefore vaporizes evenly, terpenes are preserved and less stays behind at the bottom. For cleaning, a cotton swab is usually enough.
Real-time temperature control
The device continuously measures the temperature inside the chamber during the session and adjusts. Whether you draw hard or gently and how much is loaded no longer changes the outcome – the set temperature is held instead of dropping during the draw.
Water filtration and glass top
The glass top leads the vapour through water and cools it noticeably. It detaches from the base, which makes cleaning and transport easier and allows swapping for other attachments.
Controls and battery
Operation runs through a single button: switch on, select the setting, let it heat. After around 25 seconds the device is ready. The battery carries through about 30 sessions and charges via USB-C in around two hours.
How to use it
- Take off the glass top and load the chamber with a small amount of concentrate.
- Fill the top with water and put it back on.
- Switch the device on and select one of the four temperature settings.
- Draw after about 25 seconds.
- Wipe out the chamber with a cotton swab once cool.
