Peak Pro Link
The Peak Pro Link connects the Peak Pro base to a glass rig you already own. Instead of a torch, a timer and a temperature gun, the Peak Pro’s electronics handle the heat – with the same real-time control and the same profiles from the Puffco Connect app.
Features
- Brings the Peak Pro’s 3D and 3DXL chambers to glass rigs you already own
- Fits 10 mm and 14 mm joints, both sleeves are included
- Electronic temperature control instead of an open flame
- Heat profiles via the Puffco Connect app
- Base stand for resting it between draws
- Connecting cable of about 76 cm
- Two spare O-rings and a cable clip included
- Requires firmware version “AW” or newer
Keep using the glass you have
If you already own a rig, the Link adds the electronics rather than a second device. It holds the Peak Pro chamber and sits in the glass in place of a banger. Filtration and cooling stay with your own rig; the heat comes from the base.
Temperature without a torch
A banger is heated with a torch and cools down during the draw – which is why the first and the last hit taste different. The Link holds the selected temperature throughout. Torch, butane and temperature gun are no longer needed.
Joint sizes and accessories
The box contains sleeves for 10 mm and 14 mm female joints, plus two spare O-rings, a clip for the cable and a stand to rest the Link on between draws. That covers the common joint sizes.
What the Link needs
The Link is purely an accessory: the Peak Pro and the chamber are not included. It works with the 3D and the 3DXL chamber and requires firmware version “AW” or newer on the Peak Pro – older devices are updated through the app first.
