FX Mini Ultra Blue

The WOLKENKRAFT FX MINI ULTRA is the reworked version of the FX MINI: titanium chamber, a temperature range starting at 100 °C, USB-C fast charging and a magnetically held glass mouthpiece. Despite its compact size it feels noticeably solid in the hand.

Features

• Convection heating with a titanium chamber
• Temperature from 100 °C to 220 °C, adjustable by the degree
• Up to temperature in around 20 seconds
• 1600 mAh battery, USB-C fast charging in under 90 minutes
• Glass mouthpiece with a magnetic mount
• Session timer from 3 to 5 minutes
• Large, scratch-resistant OLED with temperature, timer and battery
• Concentrate insert included
• Dimensions 81 × 50 × 27 mm, 141 g

What the ULTRA changes over the FX MINI

The temperature range starts at 100 °C instead of 160 °C, the charging port is USB-C, and the mouthpiece is held magnetically rather than pushed in. On top of that comes a larger display that shows the timer alongside target and actual temperature. The titanium chamber stays.

Convection with a titanium chamber

The titanium chamber takes around 0.2 g of loosely packed material. Hot air flows through it instead of heating the herb against a hot wall – the result is cool, aromatic vapour that is surprisingly full even at low settings. At higher temperatures the vapour becomes denser without turning harsh.

Magnetic glass mouthpiece

The glass mouthpiece is held by magnets and seats without fumbling. To fill the chamber you simply lift it off; for cleaning you soak it separately. A dust cap for travel is included.

Battery and charging

The 1600 mAh battery is good for four to six sessions depending on temperature range and draw behaviour. Over USB-C it is full again in under 90 minutes – around 30 per cent faster than its predecessor.

How to use it

1. Lift off the magnetic glass mouthpiece and fill the titanium chamber loosely.
2. Switch the device on and choose temperature and session timer on the OLED.
3. Let it heat up for around 20 seconds.
4. Draw slowly and evenly.
5. After the session empty the chamber and clean it with the brush and tweezers.