Wolkenkraft Vita Wood Finish
Wolkenkraft Vita Wood Finish – View 2
Wolkenkraft Vita Wood Finish – View 3
Wolkenkraft Vita Wood Finish – View 4
Wolkenkraft Vita Wood Finish – View 5

Vita Wood Finish

SKU: 8075
Smono Jungle

Retailer access

To see prices, please log in or register your account.

Suitable only for herbs

SKU: 8075
Description

The WOLKENKRAFT ViTA is the simplest vaporizer in the range: one button, five preset temperature levels, a stainless steel chamber. It deliberately does without menus and is aimed at anyone who just wants to get started.

Features

  • Conduction heating with a stainless steel chamber
  • Five preset levels from 180 °C to 220 °C
  • Operated by a single multifunction button
  • Ready to use in 30 to 40 seconds
  • 1600 mAh battery for five to eight sessions
  • USB-C, fully charged in around 90 minutes
  • Can be used while charging
  • Magnetic PEEK mouthpiece with a ceramic filter
  • Fully insulated air channel, under 100 g

One button, five levels

Instead of a display the ViTA has five LEDs. A press of the button steps through 180, 190, 200, 210 and 220 °C. There is no menu, no sub-settings and nothing that can be knocked out of adjustment – that makes it the most straightforward device in the range.

Stainless steel chamber and insulated air channel

The heating chamber is made of food-grade stainless steel and works by contact heat. The air channel is fully insulated so the vapour cools on its way up. There is also a ceramic filter in the mouthpiece.

Magnetic mouthpiece

The mouthpiece is made of PEEK, a heat-resistant high-performance polymer, and is held magnetically. To fill and clean it you simply lift it off; there is no screw thread.

Battery and charging

The 1600 mAh battery is good for five to eight sessions and charges over USB-C in around 90 minutes. Thanks to pass-through, the ViTA can also be used while charging – handy when the battery is flat and you do not want to wait.

How to use it

  1. Lift off the magnetic mouthpiece and fill the stainless steel chamber loosely.
  2. Hold the button until the device switches on.
  3. Use short presses to choose one of the five levels.
  4. Let it heat for 30 to 40 seconds, then draw slowly.
  5. After the session empty the chamber and clean it with the cleaning stick.