Go SRT Vaporizer

The Arizer Go SRT succeeds the ArGo and is the brand's fastest portable: ready from cold in five to fifteen seconds, with a 5000 mAh battery and USB-C Power Delivery.

Features

• Ready from cold in 5 to 15 seconds
• Temperature from 50 °C to 220 °C
• Three presets: 200 °C/30 s, 190 °C/2 min, 180 °C/5 min
• 5000 mAh battery for up to 60 minutes of continuous use
• USB-C with Power Delivery, usable while charging
• V-Scale places temperature, airflow and setting on four intensity levels
• Glass stem with shells and a magnetic protective cap
• 14 mm water pipe adapter available

Who is the Go SRT for?

For customers who want a quick single draw and no patience for a minute of preheating. The Go SRT is ready from cold in five to fifteen seconds — no other Arizer device manages that. It succeeds the ArGo and is at the same time the device for anyone who vaporizes briefly across the day rather than once at length.

SRT: short draws instead of long sessions

The three presets make the design intent plain: 200 °C for thirty seconds, 190 °C for two minutes, 180 °C for five minutes. Anyone wanting a single draw picks the shortest setting and is done in seconds, without heating the rest of the load through. That spares the material and makes one fill last across several occasions.

The V-Scale as an advice tool

Arizer combines temperature, airflow and device setting into one scale with four intensity levels. For the conversation across the counter that is genuinely useful: instead of explaining three values separately you point at a level and the customer knows what to expect. The scale is printed on the packaging too.

5000 mAh — the largest battery in the range

At 5000 mAh the Go SRT sits well above every other portable Arizer device, including the twin-cell Solo II MAX. That is enough for up to sixty minutes of continuous use or, with short draws, a whole day. Charging is over USB-C with Power Delivery, and it remains usable while it charges.

Glass stem with shells

As with all Arizer portables you fill a glass stem and insert it. New are the shells: plastic sleeves that hold the stem with its load and carry it protected. Anyone refilling on the move prepares several stems and swaps them in the device — with no loose herb in a pocket.

Temperature range and controls

The range runs from 50 °C to 220 °C. Alongside the three presets, free adjustment is available. A magnetic protective cap closes the device for transport and keeps dust out of the heater well — on a device that is constantly pocketed and unpocketed, that is more than decoration.

Water filtration via the Go WPA

For connecting to a water filter there is the Go WPA with a 14 mm fitting, available as an accessory. That lets the pocket device hang on an existing bong at home — for dealers an obvious add-on sale alongside the device.

Go SRT or ArGo?

The ArGo is smaller and cheaper but needs around sixty seconds to heat and has a 3400 mAh battery. The Go SRT heats in five to fifteen seconds, has 5000 mAh, charges over USB-C with Power Delivery and brings the V-Scale. Anyone after price takes the ArGo; anyone after speed, the Go SRT.

How to use it

1. Fill the glass stem loosely with ground herbs and insert it.
2. Switch the device on and select one of the three presets.
3. Let it heat for five to fifteen seconds.
4. Draw slowly and evenly until the timer runs out.
5. Remove the stem, tap it out and clean it with the brush.